Education

Turn the blade at the top of the windshield, and be ready to slip under the coating of steel, once you climb.

Place the molding removal tool steel under the arrangement, pulling slightly upward, and then quickly sliding the edge of the sheet below. Thus avoids scratches on the glass.

Remove the removal tool down because the clip fasteners that holds the windshield in place. The clips are released and the trim is loose. Keep doing this around the windshield frame finished until all has been removed.

Cut the rubber window seal is in place along the outer edge of the windshield. Slide the knife under the seal to remove it. All that is exposed at this point will the structure of metal.

Completely remove the windshield. Place the sheet of cold knife at an angle of 90 degrees between the windshield and metal structure. Began turning the handle to separate from the windshield frame, and then force the blade through the material using the handle butyl T.

Get in the car and push it through the windshield. If you have another person working with you, grab the windshield while pushing outwards to not touch the ground and breaks.