Peeling the rubber window seal from the outer edge of the glass plate. The seal will break in its continuity, allowing you to relax with a screwdriver, and then pulling it released. As the seal is loosened, external screws are made visible.

Remove the rubber seal on the inside, where applicable, pulling it free from the window assembly in the same way that the outer ring.

Remove the screws inside the window assembly turning left. The window frames of plastic from loosening screws are removed. Some units release the glass sheet when both parties (internal or external) is unscrewed, most models the glass is released only when the two parts are unscrewed.

Remove the screws that secure external turning them counterclockwise. As the plot becomes free, the glass may change its position. Working with caution plastic support frame glass without falling glass outside the vehicle.

Remove the bowl outside the caravan and carefully lowered to the ground. Sliding windows in two pieces will still in one piece, with two plates held in place with a subplot.