The windshield washer fluid helps clean your windshield to remove dirt. The cleaning fluid may include soap to improve their ability cleaning alcohol to prevent water becomes ice, although most of it is water. When driving in dusty conditions, you probably need to use your wipers more frequently, necessitating check the fluid level. This guide teaches you to do.

1. Park your car.Ideally the stations on a level surface that helps the engine to cool. Wait a few minutes until the hood of the car so cool enough for you to rest your hand on it.
2. Open the hood.
3. Searching the washing fluid tank.In most cars the washing liquid tank is located behind the engine, near the base of the wiper. The tank is usually translucent, allowing you to see if there is fluid in the reserve or if empty.
4. Check the fluid level. Many tanks clean windshield fluid have markings to show the fluid level. If the tank is below average, you need to fill. Also check if the tank is ruptured or leaks.
5. Uncover the cleaning fluid tank.The tank top is usually designed to close and open under pressure.
6. Make cleaning liquid until it reads “complete”.We recommend using a funnel to avoid losses. Once you’ve filled your tank back the cover and close the hood.
7. Try the wipersthis should eject a uniform fluid; if it does not have to clean it again.

Advice

Use only the cleaning fluid recommended in your manual. You can use tap water as a cleaning fluid, however it could turn into ice.