If you have the old type of windows with separate pieces of glass in each panel, you can change only the broken panel. With a little experience, you yourself can replace the glass in one of these panels and save some money for the repair. All you need to get ready for work is: glass parts, which are available at most hardware stores or glass; some materials and tools. This technique only works for windows with wooden frame. The modern energy efficient windows with plastic frame will have to be repaired by a professional.

Instructions

1. Put on gloves to avoid accidents. Use the needle nose pliers to remove all glass fragments that are still in the frame. If you need to break the glass, be sure to cover it with tape before, so they do not fly away.
2. Remove all old putty or glazing compound with spatula. You can soften these compounds with mineral spirits if necessary. Remove all points of glazing. Use medium-grit sandpaper to sand the frame and anywhere putty that are left. It covers the inside of the frame with a thin layer of new caulk; use the spatula to put appropriately.
3. Place the glass in the window carefully. Put points glazed glass frame around every 5 inches (12.7cm); be sure to put two points close together near each corner. Press them in place with the spatula. Put another thin layer of putty around the glass and press it in place; this excess clean glass and let it dry. Drying times vary, so read the instructions to be sure.