Removing paint fiberglass auto

Body panel’s auto glass fiber are a godsend when manufacturing vehicles with low weight. Painted fiberglass is a challenge if you want to completely remove the paint to repaint your vehicle. Fiberglass is a porous material composed of millions of glass fibers, and these fibers can absorb most solvents and removers, keeping within the fibers for long durations. Proper selection of a chemical paint remover is the most important when we want removing paint from fiberglass panels.

Instructions:

  1. Put on goggles and solvent – resistant gloves. Open all doors and windows and a large fan on a door so that pushes air through the building and the door open.
  2. Remove all components that are not painted, especially plastic and rubber accessories.
  3. Paint your paint remover fiberglass painted on the surface of fiberglass 2 feet by 2 feet of area at a time, allowing the stripper work for five minutes. When the etchant on the surface of brushing, apply generously and only cross your brush every area in one direction, not overlapping the previous race. Scrape the paint once you find easy to lift with paint scraper.
  4. Wash each section after the removal of paint, and before going to peel the next area with a sponge soaked in water. Back sponge into a bucket of clean water and dry the section with a clean cloth free oil.
  5. Repeat steps 3 and 4 until all areas of paint have been removed from fiberglass body.

Tips & Warnings:

  • Always choose the chemical paint removers carefully, making sure that it is designed for use in fiberglass. Excellent sources for these chemicals are local marina and auto supply shops. It is better to buy the chemical etchant locally, as shipping costs are very high when sending hazardous materials. Do not use a back and forth motion with his brush. Brush the stripper on the surface by moving the brush in the same direction every move.
  • Provide the most usual when using this product disassembly ventilation. A fan should be set to a portal in a way to draw more fumes through the plant and out through the entrance door opening. The windows must be open to provide air flow in the building. Paint clamps designed to remove paint from fiberglass, as in all other paint stripping chemicals are dangerous products that pose serious security risks. Follow all the manufacturer’s instruction.