The windshield is one of the key elements of a vehicle. If you are in poor condition, the visibility will be much worse, much greater risk of accident and therefore danger driving around. In short, you cannot drive a windshield in disrepair.

And if damaged ours, how can we repair the windshield?  It’s an easy question to answer, but more difficult to carry out. In fact, if your windshield has a wide gash, directly we suggest you go to a workshop to repair it. And if your insurance covers it, never do it yourself, since you pay for something, right?

Total cleaning

You cannot even touch the windshield without being clean. And when we say clean, we mean that it is so clean that up cleaning smell from afar. You cannot have even a spot or a piece of land on the glass or anything.

It is advisable to purchase a specific glass cleaner and do not use cleaner classics. Also, avoid using a either use a clean cloth or microfiber.

Push and pull

When you have ensured that the cup is completely set, simply press to the bottom by pressing the suction syringe. Then pull slowly and do it again after 30 minutes.

It takes at least 12 “pressures” for the resin to take effect, so this process can take 6 to 7 hours. Be patient and keep in mind that it is much more economical to change the entire windshield.

Remove the syringe and clean

Once the process of pressing and pulling is finished, remove the syringe and remove the excess resin around the crack. Remember: simply remove the resin around the crack, not on it. If you do all the work of these 6-7 hours there will be for nothing.

And will only clean the glass again with the same cleaner and cloth at first. If the crack was small, you will see disappear. Otherwise, you know what the answer is: the crack was too big or has done wrong.